![ELECTOR 14010 User Manual Download Page 4](http://html.mh-extra.com/html/elector/14010/14010_user-manual_2378818004.webp)
Page 3
www.elector-water-treatment.com
elector – Electrochemical Water Treatment for Heating Systems
1.3 Safety Instructions
Please read these operating instructions carefully before operating the device and follow the instructions. The
operating instructions should always be kept at hand.
Personal injury and property damage resulting from non-compliance with these operating instructions are not
covered by the Product Liability Act. The manufacturer assumes no liability for any other damage caused by
non-compliance with these operating instructions.
Safety instructions warn against dangers and help to avoid personal injury and property damage. For your own
safety, compliance with the safety instructions in this manual is essential.
The applicable national and international safety regulations must be observed.
Each operator / operator is responsible for complying with the applicable regulations and must independently
strive for the latest regulations.
1.4 Safety Regulations
The commissioning of the elector system may only be carried out by qualified personnel.
For the maintenance and / or the exchange of the consumables of the plant the specifications of the
manufacturer must be observed .
Conversions on the device voids the manufacturer‘s warranty.
The manufacturer assumes no liability for damage caused by improper commissioning. In addition, the warranty
expires.
The elector system may not be operated in potentially explosive atmospheres or under an open flame.
The reaction container may only be put into operation in perfect condition.
The system may only be used for the treatment of water in closed heating and cooling circuits. A treatment of
drinking water, acids, alkalis, etc. is not permitted.
Check the system for damage before putting it into operation.
The intended use within the performance limits must be ensured.
Before carrying out any repair work, the system must be disconnected from the water pressure or mains supply.
Damaged systems must be put out of operation immediately. Have defective or damaged reaction containers
repaired only by qualified personnel authorized by the manufacturer. This happens in your own interest. They
thus prevent inadequate repairs.
Observe the relevant and binding standards.
1.5 Disclaimer
Use must be performed exactly as specified in this manual. The manufacturer is not liable for any damage,
including consequential damage, which may result from incorrect installation or misuse of the product.