Electia C-Fence, Quick Start Manual

Page: 6 / 32

6 www.electia.se
j) You can now choose if you want a SMS report each time this user code is used
to arm or disarm the system,
”Latch rpt ON” – Reporting ON ,
”Latch rpt OFF” –
Reporting OFF
.
k) ”User Name”
will now appear on the display. Select a name for the user to
whom the code belongs. Press the digit keys on the control panel as much
times as necessary to enter the desired letters
(see the table)
. Step forward
with
“

”,
backwards with
“

”
and delete letters with
” ”
. Once you have
entered the user name, press
”OK”
to confirm.
8) System code –
It is recommended to change the default setting in order to
prevent unauthorised access
a)
Go to installer mode. Proceed as follows:
i)
With the alarm disabled, go to installer mode by pressing and
holding
”*”
for 2 seconds. Then enter the user code
”1234”
and
confirm by pressing the
”OK”
button.
ii)
Now you have to key in the installation code as well, which is preset
to
”7982”
. After that confirm by presing the
”OK”
button.
b)
Use
“

” “

”
in the programming menu to move up and down the menu.
c)
Then select ”
Installer Code
” and press
”OK”.
d) Enter the desired 4-digit code and confirm with ”OK”.
e) The display now shows ” Repeat new code ”, enter the code one more time
and press ”OK”.
f) To return to the main menu, press ” ”.
Your alarm is now working and when the camera is activated and the
alarm is active, pictures will be sent to the specified numbers and
emails.