Elecro Engineering Spectrum Hybrid SH-110, Installation & Operating Manual

Page: 7 / 29

5
www.elecro.co.uk
ENGL
IS
H
www.elecro.co.uk
FILTER
PUMP ELECRO HEATER
POOL
NON
RE
T
URN
VAL
VE
U
V
SYSTEM
SPE
C
TR
U
M
HY
B
R
ID
110W
Fig 4.
Mounting the UV Unit
The unit may be mounted on a wall or other suitable vertical surface that
is structurally strong enough (for example: when full of water the unit is
too heavy to mount onto a conventional wooden fence panel). The unit is
supplied with a fixing kit. The unit can be mounted vertically as shown in
the next pages in fig 5. and 6. or horizontally as shown in fig 7.
NOTE!
When mounting the UV it is essential to leave a clearance space of at least 1m
from one side of the unit to allow access to replace the lamp(s) and/or quartz
sleeve(s) when required. Both the lamps and the quartz sleeve can be replaced
from either end of the unit; if installing vertically the 1m clearance space must
be above or below the unit, if installing horizontally the 1m clearance space
must be to the left or right of the unit.