Elecro Engineering Spectrum Hybrid SH-110, Installation & Operating Manual

Page: 26 / 29

Calculating Pool Volumes
The following pages will show you how to calculate the volume of your pool.
NB For pools with different depths:
D1 + D2
= Average Depth
2
If your pool has a sloping bottom, then take the deepest measurement (D2) and the shallowest
(D1). If there are different levels, then you need to do several calculations of area for each depth
and add them up at the end.
Rectangle & Square Pools
Volume = Length (L) x Width (W) x
Depth (D)
Average Depth
Circular
Volume = π (3.142) x Radius2 x
Depth (D)
Average Depth
Radius = Diameter divided by 2
Radius
24
ENGL
IS
H
www.elecro.co.uk