Elecro Engineering Spectrum Hybrid SH-110, Installation & Operating Manual

Page: 3 / 29

ENGL
IS
H
1
www.elecro.co.uk
Important Notes
Congratulations on purchasing the Spectrum Hybrid UV + HO pool
sanitising system, the latest in UV technology, manufactured in England to
the highest standards.
To ensure your new product will give years of trouble free service
please
carefully read the following instructions.
Incorrect installation will affect your warranty
. Do not discard this
manual, please retain for future reference.
Important safety information
• Consult a qualified electrician
• Never look directly at an illuminated UV lamp
• Do not run this unit dry, do not cover this unit
• Always isolate the unit from mains electricity and turn off the water
supply before carrying out maintenance
• Always disconnect all pool appliances from the mains electricity supply
before servicing
• Power must be supplied through a Residual Current Device (RCD) with
a rated residual operating current not exceeding 30mA
• This unit must be earthed. Never use a higher rated fuse than specified
• The unit must not be submerged in water
• If the quartz sleeve is cracked, replace it immediately
• Young children should always be supervised near water
Specification
Model: SH-55 & SH-110 (Analogue); SHP-55 & SHP-110 (Digital)
Rating: 220~240V 50/60Hz; 110~120V 50/60Hz
MAX Pressure = 3 Bar
This unit is manufactured in conformance with:
Safety: BS EN 60335-1:2002. BS EN 60335-2-55:2003
EMC: EN 55015: 2000. EN 61000-3-2: 2000 EN 61000-3-3: 1995.
EN61547:1995
This unit is CE approved.