2
www.elecro.co.uk
ENGL
IS
H
12
TIMER Setup
After selecting ‘O.K.’ for the ‘CLOCK’ setup the display will then revert
back to show ‘CLOCK’, touch the ‘UP’ / ‘DOWN’ button keys until ‘TIMER’ is
displayed, touch the O.K. Button key to select, ‘TIMER 1’ will be displayed,
touch the O.K. Button key to select and ‘SET TIMER 1 ON’ will be displayed,
touch the ‘UP’ / ‘DOWN’ button keys to set the required time, touch the
O.K. Button key to save the setting, ‘SET TIMER 1 OFF’ will be displayed,
touch the ‘UP’ / ‘DOWN’ button keys to set the required time, touch the
‘O.K.’ Button key to save the required time, the display will then show
‘TIMER 2’ repeat the same procedure for all four ‘ON’ / ‘OFF’ timer settings,
select ‘EXIT’ If any Timers are not required set the ‘ON / OFF’ times the
same.
The timer mode allows you to set up 4 on and off time periods when you
would like heating to take place. These can be set to take advantage of
off-peak energy tariffs, or to ensure your pool is at the required
temperature during specific time periods.
The controller allows you to override the time clock at any point by acti-
vating the Priority of Heating Mode explained on page 19.
Note:
The time clock will only control the heating time periods and not
the filtration pump cycles.
