Elecro Engineering HR-110, Installation & Operating Manual

Page: 6 / 32

5
www.elecro.co.uk
ENGL
IS
H
Mounting the UV Unit
The unit may be mounted on a wall or other suitable vertical surface that
is structurally strong enough (for example: when full of water the unit is
too heavy to mount onto a conventional wooden fence panel). The unit is
supplied with a fixing kit. The unit can be mounted vertically as shown in
the next pages in fig 5. and 6. or horizontally as shown in fig 7.
NOTE!
When mounting the UV it is essential to leave a clearance space of at least 1
metre from one side of the unit to allow access to replace the lamp(s) and/or
quartz sleeve(s) when required. Both the lamps and the quartz sleeve can be
replaced from either end of the unit; if installing vertically the 1 metre clearance
space must be above or below the unit, if installing horizontally the 1m
clearance space must be to the left or right of the unit.
ENGL
IS
H
Fig.4