NOTE:
When AGC is OFF, the AF limiter must be set to a level that protects the
operator's ears from strong signals. See AL command. AGC cannot be turned off if NR or
autoNotch are in effect.
HD
(HDR Module Mode) [Pending]
TBD.
ID
(Radio Identification; GET only)
RESP format: I
Ds; where s is "0" (default) or the user's ID text from the status display
(typically a call sign).
K3 RESP format:
ID017; returned for K3 compatibility.
IF
(Basic Radio Information)
TBD. Provided for K3 compatibility (K22/K31 meta-mode variant).
IP
(IP Address)
RESP format:
IPV4:aaa.bbb.ccc.ddd; where aaa-ddd are the fields of the transceiver's
assigned IP address.
IS$
(IF Center Pitch)
SET/RESP format:
IS$nnnn; where nnnn =
pitch (x10 Hz)
. IS9xxx sets per-mode
default.
K3 SET/RESP format:
IS nnnn; where nnnn =
pitch (Hz)
. IS 9xxx sets per-mode default.
NOTE:
This command is named "IS" (IF Shift) for legacy compatibility reasons. It is
actually an
AF
center-pitch setting command on the K4 and other Elecraft transceivers.
K2
and
K3
(Meta Commands)
TBD. Provided for backward compatibility with K3.
K4
(Meta Command)
SET/RESP format:
K4n; where n = 0 (basic K4 mode) or 1 (advanced K4 mode). A
K4;
GET command can be used to determine whether a K4 is connected to the host
