4
5
3
1
2
6
6
1. Control panel
2. Base
3. Water tank
4. Handle for carrying water tank
5. Nozlle
6. Brush
Position the humidifier on a hard and stable surface.
Do not position the humidifier on a carpet, lining, parquet floor or surfaces which could be damaged under
the influence of water or moisture.
1. Make sure the appliance is unplugged, and the switch
(1)
is set in the
OFF
position.
2. Take hold of the handle
(4)
and take the tank
(3)
off the base of the appliance
(2)
.
3. Turn the tank, unscrew the cap (fig. 2) and fill the tank with water.
Fix the cap turning it tight.
4. Place the tank
(3)
on the base
(2)
.
Humidifier positioning
Tank filling
Every change of the settings is confirmed by a beep.
1
.
Set the rotary jet
(4)
.
2
.
Plug in the appliance. the LED display will on for 2 seconds then be off.
The unit stands by.
3.
ON/OFF
It takes charge the electric supply of the whole unit. When press ON, the display is
on, the machine operates with the lowest mist output, at the same time the fan
motor works. When it is OFF, all the functions are invalid, and the display is off.
-
symbol - signalizes turning the unit off
- humidity level in a room
Humidifier operation
fig. 01
fig. 02
fig. 03
4.
PRESET
When the unit stands by, press this button. The preset time can be chosen from 1 hour to 24 hours.
The preset time will be counted down to work with the highest mist output.
ULTRASONIC HUMIDIFIER NU6
INSTRUCTION MANUAL
GENERAL DESCRIPTION
TECHNICAL DATA
Position the humidifier on a hard and stable surface.
Do not position the humidifier on a carpet, lining,
parquet floor or surfaces which could be damaged
under the influence of water or moisture.
Humidifier positioning
APPLIANCE OPERATION
- power: 30W
- supply voltage: 230V ~ 50Hz
- capacity 4.5l
- output 300 30ml/h
- appliance output designed
for the room 15-20m
2
- operation time with full
water tank ~ 15 hours