30
If PP value is 0, and VV in the range of [1-23], then periodic status messages will be sent multiple times per day, with period being
specified as VV time.
E.g. XXXX_INFO:0.2,
means that status message will be sent every 2 hours.
To disable periodic status messages, send SMS:
The status message INFO will not be sent until enabling or restoring default parameters.
3.7 Remote Microphone listening
To be able to listen what is going on in remote house can be done in two different ways:
1. When alarm has been activated, the system will ring pre-programmed numbers and user can answer the call. Remote
microphone will be enabled for listening.
2. By sending SMS message
The system will ring the sender of former SMS, and upon answering the call, user can listen to any sounds in the building. The
phone call must be answered within 20 seconds otherwise the system will stop trying and return to previous state.
3.8 Blocking unknown incoming numbers
By default ESIM262 can be controlled from any of the pre-programmed numbers NR1 .. NR5. But user can access the system
and control parameters from any number as long as password is know.
To enable this feature, send SMS message:
E. g. 0000_STR:ON
To disable this feature, send SMS message:
3.9 Receiving alarm message due to temperature deviation
The system ESIM262 informs the user by SMS message in the case if temperature deviation from the set values. In order to use this
function it is necessary to connect temperature sensor and set the parameters accordingly.
Examples of usage: temperature control for greenhouses, houses, aquariums, server premises, refrigerators etc.over GSM network.
Manufacturer set this function off. To turn the system on send the following SMS message:
min – temperature in
o
C, it can have values [-55...+125]
max – temperature in
o
C, can have values [-55...+125].
If the controlled temperature drops below min value by one degree, the user will receive SMS message
with the temperature at that time.
If the controlled temperature rises above max value by one degree, the user will receive SMS message with the temperature at that time.
E. g. XXXX_TEMP:16:20
means that SMS message will be sent if the temperature drops below 16oC or rises above 20
o
C.
XXXX_TEMP:-10:-1
means that SMS message will be sent if the temperature drops bellows -10oC or rises above -1
o
C
XXXX_MIC
XXXX_INFO:00.00
XXXX_STR:ON
XXXX_STR:OFF
XXXX_TEMP:min:max
ESIM 262
XXXX_TEMP
:16:20
ESIM 262
0000_
STR:ON
ESIM 262
XXXX_
INFO:0.2
Summary of Contents for ESIM262
Page 50: ...U ra ams...
Page 51: ......
Page 52: ...Pagaminta Lietuvoje Made in Lithuania www eldes lt...
