4
4. Additional Information
Limited Liability
The buyer must agree that the system will reduce the risk of fire, theft, burglary or other dangers but does not guarantee against
such events.“ELDES UAB” will not take any responsibility regarding personal or property or revenue loss while using the system.
“ELDES UAB” liability according to local laws does not exceed value of the purchased system. “ELDES UAB” is not affiliated with any
of the Internet providers therefore is not responsible for the quality of Internet service.
Manufacturer Warranty
This device carries a 24-month warranty by the manufacturer “ELDES UAB”. Warranty period starts from the day the system has
been purchased by the end user. The warranty is valid only if the system has been used as intended, following all guidelines listed
in the manual and within specified operating conditions. Receipt must be kept as a proof of purchase date. The warranty is voided
if the system has been exposed to mechanical impact, chemicals, high humidity, fluids, corrosive and hazardous environment or
other force majeure factors.
Safety instructions
Please read and follow these safety guidelines in order to maintain safety of operators and people around:
• DO NOT use the system where it can be interfere with other devices and cause any potential danger.
• DO NOT use the system with medical devices.
• DO NOT use the system in hazardous environment.
• DO NOT expose the system to high humidity, chemical environment or mechanical impacts.
• DO NOT attempt to personally repair the system.
EPGM8 must be powered by 10-24V
100mA max. DC power supply which must be approved by LST EN 60950-1 standard
and be easily accessible nearby the device. When connecting the power supply to EPGM8, switching the pole terminals places
is forbidden.
Any additional devices linked to EPGM8 (electrical appliances, relays etc.) must be approved by LST EN 60950-1 standard.
Main power and backup battery of ESIM264 alarm system must be disconnected before any installation or tuning work starts.
The system installation or maintenance must not be done during stormy conditions.
EPGM8 is fully turned off by disconnecting 2-pole switch device of the external power supply or any other linked
device that EPGM8 is powered from.
Copyright © “ELDES UAB”, 2011. All rights reserved
It is not allowed to copy and distribute information in this document or pass to a third party without advanced written authorization by
“ELDES UAB”. “ELSDES UAB” reserves the right to update or modify this document and/or related products without a warning. Hereby,
ELDES UAB declares that this PGM output expansion module EPGM8 is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at www.eldes.lt
The WEEE (Waste Electrical and Electronic Equipment) marking on this product (see right) or its documentation indicates that
the product must not be disposed of together with household waste. To prevent possible harm to human health and/or the
environment, the product must be disposed on in an approved and environmentally safe recycling process. For further infor
-
mation on how to dispose of this product correctly, contact the system supplier, or the local authority responsible for waste
disposal in your area.
