ELDAN MPR200T Manual Download Page 111

Page: 111 / 202

Eldan Recycling A/S

Page

4.3.0

Setting: Max. Overload

The Max. Load MPR setting is used to stop the MPR inlet conveyor. If the load

is greater than the set value, the inlet conveyor will stop.

1. Press the Number to set the Max.

overload.

2. Enter the number as a percentage

(0-100%) and press Enter.

Adjustment

Max. Overload

0 %

4.2.1

Setting: Time delay

A time delay can be set so that the inlet conveyor does not stop if motor 1 or 2

is briefly overloaded.

Setting range: 1-3 seconds.

1. Press the Number to set the time

delay.

2. Enter the number as a percentage (1-

3 seconds) and press Enter.

Adjustment Time Delay

Max. Overload

Summary of Contents for MPR200T











































































































































































































Search results

Summary of Contents for MPR200T

Reviews:

Related manuals for MPR200T

Brands by name

Popular brands

ELDAN MPR200T, Manual

Search results

Summary of Contents for MPR200T

Reviews:

Related manuals for MPR200T

Brands by name

Popular brands