Elcon LT2MSKU-T, Operating Instructions Manual, Page: 6 / 14

LT2MSKU-T
LT2MSKU-T
Version: 2008/05/23 Version: 2008/05/23
1 Short description
/ continued
The
LT2MSKU-T is powered from an optionally available power-supply module (SNG2M)
or through a DC power supply at a voltage ranging from -32 V ... -75 V.
The housing is stackable and mounted without screws. In case of wall mounting, the device
can be installed with the display elements on top, whereby the interfaces point down. The
clamp feet will be attached in turned position.
Device housing
LED display
Film with legends
Upper housing part
Bottom housing part
Clamp feet for opening
Figure 1: View of the device housing
7 Mounting of remote power supply module
/ continued
- Press upper part and bottom part together (4
×
audible snap-in).
- Attach the clamp feet (note the notches for wall mounting).
Figure 19: Closing the upper housing part
4 21