ELCOM Uniq Tablet UT10, User Manual, Page: 47 / 56

Figure 12.6. Rotating the image by 180°
Note : In Windows 7 portion of the settings included in the driver (such as display rotation) is also available from
standard system dialogs. It doesn’t matter where you change the settings, parameters are system–wide.
WIRELESS CONNECTIONS
If your Uniq Tablet UT10 contains optional WiFi, 3G or Bluetooth components, you can use them to
communicate with other devices supporting these wireless standards. You need to use either built–in
operating system functions or special utilities (supplied by communication device vendor together with the
driver or by a third party) to create and use connections. Please refer to your operating system or respective
device documentation.
CONNECTING AND DISCONNECTING A USB DEVICE
When connecting any equipment to the Uniq Tablet UT10 observe the manufacturer’s instructions for the
given device. After connection of a USB device to a Uniq Tablet UT10 port, the operating system detects it
and if it has a driver available for the device, it will load the driver and the device can then be used. If a driver
is not automatically available, it is necessary to search for one and install it. Drivers are usually located on
the CD supplied with the devices or can be downloaded from the Web site of the manufacturer.
If after connecting and using a USB device you want to disconnect, it is a good idea to remove it safely – first
in the operation system (in order that all device operations be completed) and then after notification of the
operating system to physically pull out the device’s connector. The procedure for safe removal of a device
depends on the operating system used. Connecting and disconnecting USB devices when the Uniq Tablet
UT10 is switched off is always safe.
Note : Not all equipment allows for safe removal of hardware. Safe removal makes sense mainly with
equipment which stores data (hard disks, USB memory sticks) and which also use the write buffer. Equipment which is not
shown on the list of equipment that can be safely removed can be disconnected without the procedure for safe removal.
47
Using the device
ENGLISH