ELCOM Uniq Tablet UT10, User Manual, Page: 41 / 56

BEFORE USING THE DEVICE
Prior to using the device it is necessary to connect the power adapter if is the battery is discharged. Connect
the power cable to the power adapter. Connect the power cable plug from the power adapter to the power
connector. Plug the power cable into the electrical power outlet (220V, 50 Hz).
Note : Working hours of the battery depends on the degree of processor load, power profile selected in the
operation, activities.
Note : Before using the Uniq Tablet UT10 it is a good idea to look over the sections devoted to methods of controlling
the device.
SWITCHING ON
After connecting to the power source press the POWER button on the front of the device for approximately 3
seconds. The device switches on, which is indicated by the blue LED on the front of the panel. After performing
a quick system test, the operating system is launched.
LOGGING ON TO THE OPERATING SYSTEM
The welcome screen of the operating system differs according to its type and version. Depending on the
type of the operating system it is possible that your operating system will request the entry of a user name
and password for the user account.
Enter the required information for logging on to the user account and press Enter or click the button for
logging on. If you are creating your own user account with a password, please remember the password, as
without it you will not be able to log on to your account.
Note : If during logon procedure the computer does not respond to the touch panel controls, connect an external
keyboard and mouse, which will allow you to log on and subsequently calibrate the touch panel according
to the process described in the section “Calibrating the touch panel“.
SWITCHING OFF
The device can be switched off according to the standard procedure of the operating system or by touching
the POWER button the Uniq Tablet UT10 go to sleep mode.
RESTARTING
Restarting the device is possible using the standard procedure in the operating system being used.
If an emergency restart of the device is needed, touch the POWER button until Uniq Tablet UT10 turns off or
you can use reset button. Then turn it on. With this method of restarting you risk losing any unsaved data of
the applications which were open at the time of restarting. This solution should be therefore used only if the
operating system stops responding and it is not possible to restart it using the standard method.
41
Using the device
ENGLISH