24
Operating manual VARION® C-POWER 50.0 / 09.2019
Assembly
Flue gas
A
Connect the connection pipes with the axial
compensator to the “flue gas” connection of the
generation unit.
A
Connect the connection pipes to the “flue gas”
connection (inlet) of the calorific value heat exchanger.
A
Fasten the connecting pipes.
A
Ensure that the line is not interrupted (e.g. that it does
not slip out of vertically installed parts).
A
Ensure that the connection piece (optionally available)
cannot vibrate out of place.
The line must be laid with a sufficient gradient to the
calorific value heat exchanger.
A
Make sure that a suitable flue gas silencer (optionally
available) is present:
B
In the flue gas routing.
B
In close proximity to the generation unit.
B
With horizontal installation with correct discharge of
the condensate water.
A
Connect the line to the “flue gas” connection (outlet) on
the calorific value heat exchanger.
A
Connect the line to the flue.
A
Ensure that the line is not interrupted (e.g. that it does
not slip out of vertically installed parts).
A
Ensure that the connection piece (optionally available)
cannot vibrate out of place.
Summary of Contents for VARION C-POWER 50.0
Page 1: ...Made in Germany Operating manual Combined heat and power unit VARION C POWER 50 0 09 2019...
Page 41: ...41 Operating manual VARION C POWER 50 0 09 2019 Appendix...
Page 42: ...42 Operating manual VARION C POWER 50 0 09 2019...
Page 43: ...43 Operating manual VARION C POWER 50 0 09 2019...
