INSTALLATION
31/64
EN
4 .8 .1
Electrical connection to the boiler
Burner
FB 2 K LN
leaves the factory configured for connection to a 7 pin electrical cable.
An adaptor cable kit from 7 pins to 5 pins is also supplied and factory mounted.
Proceed as follows to connect the burner to the boiler:
–
remove the burner cover (1) as described in paragraph “4.6 Removing and fitting the burner
–
cut the band (2) and unwind the cable (3)
1
2
3
4
Fig. 26
–
refit the burner cover (1), inverting the procedure above
–
connect the 5-pin plug (4) to the boiler.
Summary of Contents for Firebird FB 2 K LN
Page 63: ...Appendix 63 64 EN 11 NOTES...
