ELC sideKICK too, User Manual

Page: 5 / 15

__________________________________________________________________________________
ELC sideKICK too User Manual
Changing operating modes
The operating mode of the sideKICK too can be changed by entering Setup mode.
Setup mode allows you to change individual settings for the operating modes (e.g.
merger mode, memory handling).
To enter setup mode, follow these steps:
•
Press and hold the Store button
•
Press and hold the Up button
•
Wait for approximately 10 seconds for the LEDs to start flashing (the Up and
Store LEDs remain on)
•
The settings can now be changed, as described in the following sections
•
When no button has been pressed for about 10 seconds, the unit will timeout
of the setup mode and will store the current settings and go back to normal
operation.
Merger mode
Key
Up Down Function
○ ○
HTP merge
҉ ○
LTP merge
○ ҉
Priority merge (memories of the unit are
disabled if a valid DMX signal is on the input)
Store disable
If the LED on the store button is on, then storing new memories is disabled.
Setup mode