1.
2.
3.
4.
2.
3.
Product Use / Host Charging
Charging attention:
Placing and charging: The charging station is against the wall
and placed on a flat ground. Do not place articles within the
range of 0.5m left and right and 1.5m ahead.
The charging station cannot be used in enviroments with
strong reflection such as direct sunlight or nearby mirrors. If
there is any object with strong reflection, please cover it 7cm
from the bottom.
In order to ensure the normal working hours of the host,
please fully charge it before use. The charging time is about
5 hours.
When charging, do not assemble the water tank assembly to
the robot vacuum, so as to ensure the safety of charging and
prevent wet mops from damaging the floor.
During the cleaning process, the host can sense that its
power is insufficient and automatically start the recharging
mode to find the charging station to recharge. You can also
command the host to start the recharging mode through the
recharging button on the remote controller.
Connect the power supply.
Installing side brush: Install the side brush according to the
left and right (L/R).
5.
14
1. Charging: Place the host on the charging station for charging.
(During charging, the indicator light flashes; If charging is
over, the light is always on. The charging time is about 5
hours.
Attention
：
When manual charging,
please keep the front bumper of the
robot 2cm away from the charging
station to ensure the metal contacts
connected well for a successful
charging.
2cm
