ELBELLO C30B Instruction Manual Download Page 11

Safety Regulation

Before using this product, please read the following safety instructions and follow all the 

safety precautions.

Please read the instructions carefully.

Please keep this instuctions. 

Any operation inconsistent with this instruction manual may cause damage to this product.

1.    Only authorized technicians can disassemble this product. Users are not  

       recommended to disassemble this product by themselves.

2.    Please use the original power adapter only. Other adapters may caused damage to 

       this product. 

3.    Do not touch wires, sockets or power adapters when your hands are wet.

4.    Do not use cloth curtains or body parts to roll into the product drive wheels.

5.    Do not place this product near cigarette butts, lighters and other smoldering fires.

6.    Please clean the product after charging.

7.    Do not bend wires excessively or place heavy objects and sharp objects on the 

       machine.

8.    This product is an indoor househould product. Do not use it outdoors.

9.    Do not sit on the product.

10.  Do not use this product in wet environment (e.g. bathroom). 

11.  Before using this product, please remove all vulnerable items (e.g. glasses, lamps, 

       etc.) on the ground as well as items (e.g. wires, paper sheets, curtains) that may 

       entangle the side brushes and air suction passages.

12.  Do not put this product in a place where it is easy to fall (e.g. on desks and chairs).

13.  Please carefully check whether the power adapter is connected to the socket 

       before use, otherwise the battery may be damaged.

14.  To prevent tripping, please inform other members of the house when this product 

       works.

15.  Please empty the dust box before using this product when the dust box is full.

16.  The temperature used for this product is 0 to 40 degrees celsius.

17.  Do not use this product in high temperature environment.

18.  Please remove the battery from the machine before the product is scrapped.

19.  Please make sure that this product is not powered on when removing the battery.

20.  Please recycle the discarded batteries safely.

Use only the original rechargeable battery and charging station specially equipped by the 

manufacturer. Non-rechargeable batteries are strictly prohibited, please refer to “product 

parameters” for battery specification information.

It is forbidden to use products in environments with open flames or fragile objects.

It is forbidden to use products in extremely hot ( above 40 °C ) or extremely cold ( below 0 °C ) 

weather.

It is forbidden for human hair, clothes, fingers and other parts to approach the opening and 

operating parts of the product.

It is forbidden to use products on wet or stagnant ground.

It is forbidden for products to absorb any articles such as stones and waste paper that may clog 

products.

It is prohibited for the product to absorb any inflammable substances, such as petrol, toner and 

toner for printers or photocopiers. It is also prohibited to use the product in clean areas with 

flammable items.

It is forbidden for products to absorb any burning articles, such as cigarettes, matches, ashes 

and other articles that may cause fire.

It is forbidden to place articles at the suction port. Do not use the product when the suction port 

is blocked. Clean up dust, cotton wool, hair etc. at the suction port to ensure smooth air 

circulation at the suction port. 

Use the power cord carefully to avoid damage. It is forbidden to use the power cord to drag or 

pull the products and the product charging station. It is forbidden to use the power cord as a 

handle. It is forbidden to clamp the power cord in the crack of the door. It is forbidden to pull the 

power cord at sharp corners and corners. It is forbidden for the product to run on the power 

cord while the power cord should be far away from the heat source. 

Do not use damaged charging station. 

Even if the product has been severely damaged, burning of the product is prohibited, which 

may lead to explosion of the battery of the product.

Note:

Warning:

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

9

Summary of Contents for C30B































Reviews: