Elba EPRC-D9890TW, Owner'S Manual

Page: 4 / 18

The appliance is supplied with an anti-tilting chain to prevent the appliance
from tilting forward and accidental damage to the gas pipe. Take the expansion
with hook and make an adequate hole in the wall behind, at the same height as the
chain fixing area. Insert the plug into the hole and then screw in the hook until it is
firmly fixed to the wall. Fix the chain to the hook. Adjust to level of the cooker by
inserting the feet provided.
ELECTRICAL CONNECTION
The appliance is fitted with an approved 15 Amp flexible cord which must be
connected to a correctly earthed socket outlet (not included). The manufacturer is
not liable for any direct or indirect damage caused by faulty installation or
connection. It is therefore necessary that all installation and connection operations
are carried out by qualified personnel complying with the local and general
regulations in force.
CONNECTION OF THE FEEDING CABLE TO THE MAINS
Connect the feeding cable to a plug suitable for the load indicated on the rating
plate of the product. In case of a direct connection to the mains (cable without plug),
it is necessary to insert a suitable omnipolar switch before the appliance, with
minimum opening between contacts of 3 mm (the grounding wire should not be
interrupted by the switch).
Before connecting to the mains, make sure that:
1) The electrical counter, the safety valve, the feeding line and the socket are adequate
to withstand the maximum load required.
2) The supply system is regularly grounded, according to the regulations in force.
3) The socket or the omnipolar switch can easily be reached after the installation of the
oven. After carrying out the connection to the mains, check that the supplying cable
does not come into contact with parts subject to heating.
4) Never use reductions, shunts, adaptors which can cause overheating or burning.
5) The manufacturer is not liable for any direct or indirect damage caused by faulty
installation or connection. It is therefore necessary that all installation and connection
operations are carried out by qualified personnel complying with the local and
general regulations in force.