DESCRIPTION OF SYMBOLS
Bottom Left Burner
Top Left Burner
Center Burner
Top Right Burner
Bottom Right Burner
Electric Oven Thermostat
Electric Oven Function Knob
IGNITION AND OPERATION OF THE BURNERS
In order to ignite a burner, it is necessary to depress the knob while rotating it anti-
clockwise until the index is aligned with the position corresponding to the flame
required. (i.e. the large flame symbol).
Once the flame is lit, hold the knob depressed for about 3-4 seconds until the
burner lit automatically. If the burner fails to ignite, wait one minute for the gas to
dissipate before attempting to reignite. At this moment it is possible to adjust the
flame intensity by rotating the knob anticlockwise from maximum position to the
minimum one (i.e. the small flame symbol).
In order to turn the burner off, rotate the knob clockwise bringing the index back to
the position corresponding to the closure symbol.
RECOMMENDATIONS
In case of electric power failure, it is necessary to carry out the above-described
operations by putting a gas lighter or a flame near the burner (in such an event,
pay the utmost attention not to burn yourself).
The safety valve (for models where such item is provided) intervenes in case of
accidental flame failure, blocking the gas delivery (e.g.: air draughts, spillage of
liquids, etc.). In any case, the ignition device must not be actuated
for longer than 15 seconds. If the ignition manoeuvre fails, or should the
burner be accidentally turned off, immediately close the actuation knob and repeat
the ignition after one minute at least.
Once the ignition has taken place, adjust the flame according to your needs.
