Elba ELIO E93 MF, Instructions For The Use

Page: 39 / 52

39
AUTO MATIC C O O K ING
To cook in the oven in automatic mode
follow the instructions below:
1.
Set the cooking time
2. Set the end of cooking time
3. Set the cooking temperature and
function
These operations are carried out as
follows:
1. Set the cooking time by pressing
button “ B ” and then “ E ” to move
forward or “ D ”
to move back if you
have gone beyond the required time
(fig. 7.8).
The letter AUTO (or A )
and the symbol
appear.
2. Press button “ C ” ; the cooking time
already added to the clock time
appear.
Set the end of cooking time by
pressing button “ E ”
if you go beyond
the required time, you can go back by
pressing button “ D ”.
The symbol
go out and the letter
AUTO (or A )
remains on (fig. 7.9).
If during the setting the letter AUTO
(or A )
begins to flash on the display
and the acoustic signal comes on, this
indicates a programming error, i.e. the
cooking cycle has been superimposed
on the clock time. In this case alter
the end of cooking time or the cooking
time as above.
3. Set the cooking temperature and
function via the function selector and
thermostat knob (see specific chapters).
The oven is now programmed and
everything will work automatically; the
oven will come on as required and finish
cooking at the programmed time.
At the start of the cooking the symbol
appear.
During cooking the letter
AUTO (or A ) and
the symbol
remains on; press button
“ B ”
to display the remaining time until end
of cooking or press button “ B ”
to display the
end of cooking time.
The cooking program can be cancelled at
any time by pressing the two buttons
“ B ”
+
“ C ”
simultaneously.
At the end of cooking, the oven switch off,
the symbol
go out, the letter A
flash and
the acoustic signal come on - this can be
switched off by pressing any of the buttons.
Reset the function selector and thermostat
knob and set the programmer to manual
by pressing the two buttons
“ B ”
+
“ C ”
simultaneously.
Im p o r t a n t :
Also if oven is turned off
automatically by the programmer,
remember to turn to the off position the
function selector and the thermostat knob.
If not, when pressing two buttons“
B ”
+
“ C ”
simultaneously for manual use, the oven will
start to operate.
Remember to press the two buttons “ B ”
+
“ C ”
simultaneously to be able to use the
oven in manual setting.
Fig. 7.8 Fig. 7.9
A
symbol AUTO or A
A B C D E
A
A B C D E
symbol AUTO or A