21
GAS CONNECTION WITH A RUBBER HOSE
Important !
A rubber hose connection shall only be made if permitted by the applicable local
regulations.
The gas connection fitting (fig. 5.1) is made up of:
•
the appliance inlet pipe;
•
the floating nut;
•
the brass elbow;
•
the gaskets;
•
the appropriate hose holder (for LPG or NATURAL GAS/TOWN GAS).
Gasket
Gasket
Floating nut
Gasket
Brass elbow
1/2” G cylindrical
(ISO 228-1) male
1/2” G cylindrical
(ISO 228-1) male
1/2” G cylindrical
(ISO 228-1) female
1/2” G cylindrical
(ISO 228-1) female
Hose holder for
NATURAL GAS
or TOWN GAS
Hose clamp
(not supplied)
Rubber hose (not
supplied) for NATURAL
or TOWN GAS
connection (internal
diameter 13 mm)
Rubber hose (not supplied)
for LPG connection
(internal diameter 8 mm)
Hose clamp
(not supplied)
Hose holder for
NATURAL GAS
or TOWN GAS
Hose adaptor
for LPG
Appliance
inlet pipe
Gas connection with rubber hose holder
Note: if not already fitted on the inlet pipe, the hose holder is supplied
with the product in a separate kit; if not supplied with the appliance
it can be purchased by contacting Customer Care.
(Important: to be used ONLY IF PERMITTED by the local applicable regulations)
Fig. 5.1
Turning the gas
connection fitting
