20
GAS SECTION
5
GAS INSTALLATION REQUIREMENTS
Important !
•
Before installation, make sure that the local distribution conditions (gas type and
pressure) and the adjustment of this appliance are compatible. The appliance
adjustment conditions are given on the plate or the label.
•
This appliance must be installed and serviced only by a suitably qualified,
registered installer with technical knowledge of both gas installation and
electricity. The installation or service must comply with the current editions of
the applicable standards, regulations, and codes of practice governing gas and
electrical installations.
•
Failure to install the appliance correctly could invalidate any manufacturer’s
warranty.
This appliance is supplied for use on LPG.
It is adjusted for this gas only and cannot be used on any other gas (NATURAL or TOWN
GAS) without modification.
The appliance is manufactured for conversion to NATURAL or TOWN GAS.
The NATURAL and TOWN GAS conversion kits are supplied with the appliance.
CONNECTING THE COOKTOP TO THE GAS SUPPLY
•
The gas connection must be carried out by an authorised person according to
the relevant local standards.
•
Ensure that the room in which the cooktop is to be installed is adequately
ventilated, in compliance with applicable regulations.
•
Note: Connection to the gas supply may be made using either a rubber hose
(where permitted) or by using a flexible hose or rigid pipe.
