5
FOLDING RACK ASSEMBLY
1. Insert the cloth hanger hook (A) into the telescopic pole (B) shown in figure 6.
2. Insert the folding rack (C) into the hole at the cloth hanger hook (A) about tilting 40 degree
(C) in figure 7.
3. Press and fasten the folding rack (D) vertically as shown in figure 8.
4. Pull the folding rack (E) gently towards both sides, until two bars (F) are on the same
straight-line and completely extended as per figure 9 and 10.
5. Push and lock the sleeve (G) in place by aligning the dot on the bar (F) in figure 11.
HOLDING NIPS AND CLIPS ASSEMBLY
1. Insert the pin A1 and pin A2 on the clip A in hole B1 and B2 to fix the holding nips on the
telescopic pole as per figure 12.
2. Fix the two clips on the lower bar of folding rack (figure 13).
3. Hang the garment such as trousers you wish to steam and fix it by the two clips and the
holding nips as shown in figure 14.
Summary of Contents for EGSI-C1540
Page 9: ...9...
