4
ASSEMBLY INSTRUCTIONS
1. Loosen the clips on the telescopic pole. Pull the whole pole to its full extension and tighten
the clips. Put the cloth hanger hook onto the top of the telescopic pole as shown in figure 2.
2. Insert the bottom of the telescopic pole into the pole base then turn the pole base lock
clockwise until tightened and insert the hose onto the hose base by turning the fitting on the
end of the hose clockwise as shown in figure 3. Hands tighten only. Do not over-tighten!
3. Hang the steam head on the steam head holder as shown in figure 4.
CAUTION:
1. Always hang the steam head on the steam head holder when not in use to prevent scalding.
2. The telescopic pole must be fully extended during steam operation to ensure smooth lining
of the hose and provide a free flow of steam.
3. Do not pull the hose with excessive force or else damage will occur and cause steam
leakage. Do not move the appliance by pulling the hose. Move the appliance by grasping
the telescopic pole.
FABRIC BRUSH AND PANT PRESS ASSEMBLY
The garment steam iron comes with fabric brush and pant press. To attach these accessories to
the steam head:
1. Turn off the appliance and wait until no steam is emitted from the steam head.
2. Assemble the flute of fabric brush / pant press towards the peg that at the bottom of steam
head.
3. Push the fabric brush / pant press gently until it is firm in place.
CAUTION
:
Do
not install the accessories while steam is emitting from the steam head to avoid burns!
Summary of Contents for EGSI-C1540
Page 9: ...9...
