5
D. DELAY (“< or >”)
If you want the appliance do not start working immediately you can use this button to set the delay
time.
You must decide how long it will be before your bread is ready by pressing the “< or >”. Please note
the delay time should include the baking time of program. That is, at the completion of delay time,
there is hot bread can be served. At first the program and degree of browning must be selected, then
pressing “< or >”to increase or decrease the delay time at the increment of 10 minutes. The maximum
delay is 13 hours.
Example: Now it is 8:30p.m, if you would like your bread to be ready in the next morning at 7 o’clock,
i.e. in 10 hours and 30 minutes. Select your menu, colour, loaf size then press the “< or >” to add the
time until 10:30 appears on the LCD. Then press the START/STOP button to activate this delay program
and the indicator will light up. You can see the dot flashed and LCD will count down to show the
remaining time. You will get fresh bread at 7:00 in the morning, if you don’t want to take out the bread
immediately, the keeping warm time of 1hour starts.
Note: For time delayed baking, do not use any easily perishable ingredients such as eggs, fresh milk,
fruits, onions, etc.
E. Colour
With the button you can select lower, medium, dark and rapid colour for the crust. Press the colour
button until a marking appears above the desired degree of browning. The baking time changes
depending on the selected level of browning. For baking programs 1 - 4 you can activate rapid mode
by pressing the button until the triangle indicates the rapid program. The program 6, 7, and 11 is not
applicable for rapid setting.
E. Start/stop
The button is used for starting and stopping the selected baking program. To start a program, press
the START/STOP button once. A short beep will be heard, the indicator will light up, and the two dots
in the time display begin to flash and the program starts. Any other button is inactivated except the
START/STOP button after a program has begun.
To interrupt operation, briefly press the Start/Stop button, until an acoustic signal is heard and the
time flashes on the display. By pressing the Start/Stop button again operation can be resumed. If you
do not pressing the Start/Stop manually, the machine will resume to process program automatically
after 10 minutes.
To stop the program, press the START/STOP button for approx. 3 seconds, then a beep will be heard,
it means that the program has been switched off. This feature will help to prevent any unintentional
disruption to the operation of program.
Note: Do not press the Start/Stop button, if you only want to check the state of your bread.
