Elba 126 EX 339, Instruction Manual

Page: 55 / 132

55
ADJUSTING OF THE MINIMUM OF
THE TOP BURNERS
The burners in the cooktop are fitted
with safety valves; in these models the
minimum flame regulation screw is
located on the outside of the gas tap
(Fig. 10.5).
In the minimum position the flame must
have a length of about 4 mm and must
remain lit even with a quick turn from the
maximum position to that of minimum.
The flame adjustment is done in the fol-
lowing way:
– Turn on the burner
– Tum the tap to the MINIMUM position
– Take off the knob
– With a thin screwdriver pass by the
hole of microswitch and turn the screw
F until adjustment is correct (fig. 10.5).
For G 30/ G 31 gas, tighten up the
regulation screw.
F
Fig. 10.5