Pagina 5 van 24
GDR
22/12/04
Manual The Big One II
•
Take all plates and put them temporary aside.
•
Take the right side and put it the same as the left side (the right side is the
mirror image of the left side).
•
Attach it to the back side with 3x screw n° 3 ( this is only temporarily so do not
screw them completely).
•
Remove the red spanwires with which the gantry is attached and push the
gantry forward.
•
Take the profiles in front of the gantry.
•
Unwrap the longest pack and position the partitioning profile (= profile with 2x
two pins) between the two sides (see drawing). Attach this profile in the
provided holes with a rubber hammer.
PROFILE
