Elation SMARTY HYBRID, User Manual

Page: 20 / 42

www.elationlighting.com
20
Features are subject to change without any prior written notice.
*Rotation direction (Clockwise or Counterclockwise) of effects depends on orientation of the fixture head and Pan/Tilt settings.
MAIN MENU SUB MENU OPTIONS / VALUES
(Default Settings in BOLD )
DESCRIPTION
FUNCTION
Set Dmx Address A001~AXXX DMX Address Setting
Dmx Value ALL…… DMX Value Display
Slave Mode Slave1, Slave2, Slave3 Slave Setting
Auto Program Master / Alone Auto Program
Accelerometer
Information Password=
164 (PSWD Required)
Calibration Password= 011 (PSWD Required)
INFORMATION
Time Information
Current Time xxxx(Hours) Fixture Run Time From Power ON
Total Run Time xxxx (Hours) Fixture Total Run Time
Last Run Time xxxx (Hours) Fixture Last Run Time
Lamp Hours xxxx (Hours) Lamp Total ON Hours
Lamp Off Time xxxx (Hours) Lamp OFF Time
LastRun Password
Password=
038 (PSWD Required)
Clear Last Run ON / OFF Clear Fixture Last Run Time
LampTime Password Password= 038 (PSWD Required)
Clear Lamp Time ON / OFF Clear Lamp Run Time
Temperature Info
Head Temperature xxx C° / F ° Temperature in Fixture Head
Base Temperature xxx C° /
F °
Temperature in Fixture Base
Ethernet IP xxx . xxx . xxx . xxx xxx . xxx . xxx . xxx Displays Fixture Ethernet Address
Fan Info xxxx RPM Speeds of Head/Base Fans
EnCode Info PAN: xxxx TILT:xxxx PAN and TILT Encode Info
Software Version 1U01: - 5U01: ≥ V2.1.1 Software Version
Error Info Error Record 1 ~ Error Record 10 Fixture Last 10 Error Codes
LAMP
CONTROL
Lamp On/Off ON/ OFF Lamp ON/OFF
Automatic On
ON/
OFF Lamp ON/OFF when Power ON
Lamp On via DMX ON /OFF Lamp ON via DMX
Lamp Off via DMX ON /OFF Lamp OFF via DMX
Lamp Power Mode 190W, 240W, 280W Lamp Power Mode
PERSONALITY
Status Settings
Address via DMX ON /OFF Address Via DMX
No DMX Status Close /
Hold
/ Auto Fixture State When NO DMX Signal
Pan Reverse ON/ OFF Pan Reverse Movement
Tilt Reverse ON/ OFF Tilt Reverse Movement
Pan Degree
630/
540 Pan Degree Select
Feedback ON /OFF Movement Feedback
Hibernation OFF, 01M~99M, 15M Stand By Mode
Service Setting
Password Password= 050 Service Password
RDM PID 22A6xxxxxxxx
RDM PID Code
(PSWD Required)
Clear Err. Info ON/ OFF Clear Error Info (PSWD Required)
DFLT Pow. LampOn ON/ OFF Set Lamp Default Power State to ON
DFLT Pow. EflyOn ON/ OFF Set E-FLY Default Power State to ON
USB Update YES/ NO Update Fixture Software (see page 00)
Display Setting
Shutoff Time 02~60m
05m
Display Shut Off Time
Display Reverse AUTO , ON, OFF Display Reverse 180º
Key Lock ON/ OFF Key Lock
Temperature C/F
Celsius/
Fahrenheit Temperature Switch Between C˚/ F˚
Initial Status PAN =XXX Initial Effect Position
Select Signal
E-FLY Off Disable E-FLY Wireless Transceiver
DMX & E-FLY Activate 5pin DMX and E-FLY
E-FLY & Out Activate E-FLY and 5pin DMX OUT
Art-Net Activate Art-Net
sACN Activate sACN
Ethernet IP XXX . XXX . XXX . XXX Enter Fixture Ethernet Address
Ether Mask IP XXX . XXX . XXX . XXX Enter Ethernet Sub Mask Address
Set Universe 000 - 32767 Set ArtNet Universe
Set E-FLY Chn 00 - 14 Set E-FLY Wireless Channel
Reset Default
ON/
OFF
Password=
011 Restore Factory Settings
(PSWD Required)
Supports Software Versions: ≥ 2.1.1