![Elation PowerWash 250 User Manual Download Page 32](http://html1.mh-extra.com/html/elation/powerwash-250/powerwash-250_user-manual_2376231032.webp)
Power Wash 250™
©Elation Professionals® Los Angeles, Ca. 90058 -
www.ElationLighting.com
-
Page 32
5. If the light is brighter around the edge than it is in the center, or if light output is
low, the lamp is too far back in the reflector. “Push” the lamp out by turning the
screws
Attention: Make sure that the minimum distance between the lamp and lens is
more then 1.0mm. If it is less then this distance, the lens has higher probability of
shattering.
2. Fuse Replacement
Caution
: Always replace with the exact same type fuse, unless otherwise specified b y
an authorized Elation
®
service technician. Replacing with anything other than the
specified part can damage your unit and will void your manufactures warranty.
Warning
: If you continue to blow fuses, STOP using the fixture. Contact customer
support for further instructions, you may have to return the unit for servicing.
Continuing to use the unit may cause serious damage.
Fuse Replacement:
Locate and remove the unit’s power cord from the main power
supply. Once the cord has been removed located the fuse holder located on the side
panel of the near the power. Using a flat-head screwdriver remove the fuse holder
from its’ housing. Gently pull out the bad fuse and discard of it properly and replace
with an exact match. Reassemble in reverse order.
3. Maintenance and Cleaning the POWER WASH 250™
It is absolutely essential that the fixture is kept clean and that dust, dirt, smoke, and
fog-fluid residues do not built up on or within the fixture. This will reduce the risk of
premature lamp life failure and will prevent a significant reduction in lamp output.
Regular cleaning will not only ensure the maximum light-output, but will also allow the
fixture to function reliable throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recom-
mended, under no circumstances should alcohol or solvents be used!
The inside optical system should be maintained only by authorized persons. Please
contact Elation professionals for recommendation associated with internal cleaning
procedures.