Power Spot 700™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page
31
fixtures together and operate without a controller. The fixtures will be sound
activated. In Master-Slave operation one fixture will act as the controlling fixture and
the others will react to the controlling fixtures programs. Any fixture can act as a
Master or as a Slave.
4.3.1
Using standard XLR microphone cables, daisy chain your fixtures together via
the XLR connector on the rear of the fixtures. Remember the Male XLR
connector is the input and the Female XLR connector is the output. The first
fixture in the chain (master) will use the female XLR connector only - The last
fixture in the chain will use the male XLR connector only. For longer cable runs
we suggest a terminator at the last fixture.
4.3.2
Follow the same procedures listed in the previous Stand-Alone section. With two
exceptions; Be sure the first unit in the chain is selected as the “master“ (MSTR)
is turned on in the audio submenu. All other fixtures must be in “slave“ mode
(SVPT) turned on in the audio submenu.