17
www.elationlighting.com
PERSONALITY – Service Setting - Password (050)
u
NOTE
:
The Service Password MUST be entered in order to access the following menus:
RDM PID, Ethernet IP, Ethernet IP Mask,
and
Clear Err. Info
.
PERSONALITY – Service Setting - RDM PID
Select various submenus via RDM. RDM stands for "Remote Device Management",
which provides the ability to control the device remotely while connected to a
DMX-bus. ANSI E1.20-2006 by ESTA specifies the RDM standard as an extension of the
DMX512 protocol. Manual settings like adjusting the DMX starting address are no
longer needed. This is especially useful when the device is installed in a remote area.
RDM ready and conventional DMX devices can be operated in one DMX line. The
RDM protocol sends its own packages in the DMX512 data feed and does not
influence conventional devices. If DMX splitters are used and RDM control is to be
used, these splitters must support RDM. The number and type of RDM parameters
depend on the RDM controller being used.
PERSONALITY - Display Setting –
Key Lock
When ON, Control Panel buttons lock automatically after exiting main menu for 15
seconds. To unlock, keep
MODE/ESC
button pressed for 3 seconds.
PERSONALITY - Dimming Modes
Select desired DIMMER MODE (
Standard
, Stage, TV, Architectural, Theatre).
