Elation Professionals - wwww.ElationLighting.com Page
8
1
Preparation and Installation
1.1 Mounting
The
MINI PATEND
MINI PATEND
is fully functional whether it hangs or is mounted to the wall. It can
also be operated while standing on the floor. Keep a safety distance of 0.5 m from any
easy inflammable materials (decoration etc.). Install a safety wire that can hold at least
10 times the weight of the fixture. Never use the carrying handles for secondary
attachment.
Pay attention to the regulations of: BGV C1 (former VBG 70) and
DIN VDE 0711-217 !
The installation should be done by qualified personal only.
1.1.1 Clamps
Use two clamps on the backside of the
MINI PATEND
MINI PATEND
to mount the unit on a
truss (each two opposite threads max. M10x20). See also printing on the
backside of the case.
1.1.2 Mounting plate
For a permanent installation of the
MINI
MINI
PATEND
PATEND
you can use an optional
mounting plate to fix the unit on a wall. The plate uses 2x screws M6x10 and one
M10x16 (the mounting plates are included in the delivery).
