Elation Professionals - wwww.ElationLighting.com Page
7
1.1 Safety Instructions
The MINI PATEND™ is an extremely sophisticated piece of
electronic equipment. To guarantee smooth operation, it is
important to follow the guidelines in this manual. The
manufacturer of this device will not accept responsibility for
damages resulting from the misuse of this fixture due to the
disregard of the information printed in this manual.
1. Always be sure that the fan and the air inlets are clean and not blocked by anything.
Allow about 6” (15cm) between this fixture and other devices or a wall to allow for
proper cooling.
2. Never touch the fixture during normal operation. This can cause severe personal
injuries and/or damage the fixture.
3. Be sure to unplug the MINI PATEND™
MINI PATEND™
from the power outlet before performing
any service related issues.
4. Allow at least 30 minutes after disconnecting the AC before you open the
MINI
MINI
PATEND™
PATEND™
for servicing. Never touch the lamp if you are not absolutely sure it is
cold.
- Danger of BURNING -
5. Never look directly into the lamp beam. You risk injury to the retina and blindness.
6. Pay attention of the maximum lamp operation time. You have to change it if the
lamp shows any deformations or damages. The same is with all glass
components, color filters, lenses and mirrors.
7. To allow a secure operation, follow also the Installation guide described in chapter
2. Operating the
MINI PATEND™
MINI PATEND™
without suited safety aids like Safety cables or
clamps/hooks can increase the risk of an accident.
8. Installation should only be performed by qualified personnel. You need to pay
attention to the common rules of technology that are not explicit mentioned in this
manual.
9. When mounting this unit, use only the original rigging parts. Any structural
modification will void the original manufactures warranty.
10. To reduce the risk of fire or electric shock, do not expose this unit rain or moisture.
11. To not attempt to operate this fixture if the power cord has been frayed or damaged.
