22
E R R O R C O D E S
When power is applied, the unit will automatically enter a
“Motor Reset”
mode, which
brings all the internal motors to a home position. If there is an internal problem with one or
more of the motors, an error code (see below) will flash on the control display.
ERROR CODE
DESCRIPTION
TILT Er
The TILT movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed or magnet is missing) or there is a motor failure
(defective motor or defective motor IC drive on main PCB). This error may also
be displayed if the head was blocked during a reset function
PAN Er
The PAN movement is not located in the default position after the reset.
This message will appear after a fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed or magnet is missing) or there is a motor failure
(defective motor or a defective motor IC drive on the main PCB). This error may
also be displayed if the head/yoke was blocked during a reset function.
Summary of Contents for FUZE WASH Z350
Page 1: ...FUZE WASH Z350 user manual ...
Page 9: ...9 F I X T U R E O V E R V I E W ...
Page 28: ......
