2 7
E R R O R C O D E S
Error Codes subject to change without notice
ERROR CODES
DESCRIPTION
PAN
Movement is not located in the default position after the reset.
These messages will appear after a fixture reset if the magnetic-indexing circuit
malfunctions (sensor failed, or magnet is missing) or there is a motor failure
(defective motor or a defective motor IC drive on the main PCB). This error may
also be displayed if the head/yoke was blocked during a reset function.
Tilt
Zoom
Movement is not located in the default position after the reset. These messages
will appear after a fixture reset if the magnetic-indexing circuit malfunctions
(sensor failed, or magnet is missing) or there is a motor failure (defective motor
or a defective motor IC drive on the main PCB).
Focus
Blade
Blade Fan
These messages will appear if there is a temperature and/or fan malfunction.
Cool Fan1
Cool Fan2
Cool Fan3
Cool Fan4
Base Fan1
Base Fan2
HighLEDTemp
High Base
Summary of Contents for FUZE WASH FR
Page 1: ...FUZE WASH FR user manual...
Page 31: ......
