©Elation Pr
o
fessionals® - www.elationlighting.com - Event Bar Instruction Manual Page 11
©Elation Pr
o
fessionals® - www.elationlighting.com - Event Bar Instruction Manual Page 12
2. To activate Blackout press the UP or DOWN buttons until Yes
is displayed, press ENTER to confim and exit. The fixture will
now be in Blackout mode. To deactivate Blackout mode, select
No and press Enter.
Back Light - With this function you can have the LED dis-
play turn off after 20 seconds.
1. Press the MENU button until “Back Light” is displayed, press
ENTER.
2. The display will show either “ON”
or
“OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display On at all
times, or “OFF” so that the LED display turns off after 20 sec-
onds.
3. Press ENTER to confirm.
Manual Test - This function will let you manually test the
pan, tilt, & dimmer of each light.
1. Tap the MENU button until “Manual Test” is displayed, press
ENTER.
2. Use the UP and DOWN buttons to test the four lights. To exit
manual test press either the MENU or ENTER button.
Auto Test - This function will run a self test program.
1. Tap the MENU button until “Auto Test” is displayed, press
ENTER.
2. The fixture will now run a self test program. To stop the self
test press the MENU button.
Pan Inverse
1. Tap the MENU button until “Pan Inverse” is displayed, press
ENTER. Either “Inverse” or “Normal” will be displayed.
2. To activate the Pan inversion tap the UP or DOWN buttons
until “Inverse” is displayed, press ENTER to confim. To deacti-
vate Pan inversion, select “Normal” and press Enter.
Tilt Inverse
1. Tap the MENU button until “Tilt Inverse” is displayed, press
ENTER. Either “Inverse” or “Normal” will be displayed.
2. To activate the Pan inversion tap the UP or DOWN buttons
until “Inverse” is displayed, press ENTER to confim. To deacti-
vate Pan inversion, select “Normal” and press Enter.
Fixture Time - With this function you can display the run-
ning time of the unit.
1. Press the MENU button until “Fixture Time” is displayed,
press ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
Firmware Version - Use this function to display the Firm-
ware version of the unit.
1. Press the MENU button until “Firmware Version” is displayed,
press ENTER.
2. The display will show the software version. Press MENU to
exit.
Fixture Reset - Use this function to reset the unit.
1. Tap the MENU button until “Fixture Reset” is displayed,
press ENTER.
2. The fixture will now reset.
Event Bar
System Menu & Operation
Event Bar
System Menu & Operation
