w w w . e l a t i o n l i g h t i n g . c o m
9
ELAR QUAD STRIP™ User Manual ver 1
G E N E R A L G U I D E L I N E S
•
N E V E R O P E N T H I S F I X T U R E W H I L E I N U S E !
•
During the initial operation of this fixture, a light smoke or smell may emit from the
interior of the fixture. This is a normal process and is caused by excess paint in the
interior of the casing burning off from the heat associated with the lamp and will
decrease gradually over time.
•
Please make sure there are
NO FLAMMABLE MATERIALS
close to the fixture while
operating, to prevent any fire hazard.
•
Minimum
distance of inflammable materials from the surface
1.6 feet (0.5m)
.
•
DO NOT
attempt installation and/or operation without knowledge how to do so.
•
DO NOT
allow operation by persons who are not qualified to operate this type of
fixture. Most damages are the result of operations by nonprofessionals.
•
Consistent operational breaks may ensure the fixture will function properly for
many years to come.
•
DO NOT
shake fixture, avoid brute force when installing and/or operating fixture.
•
Always install the fixture with an appropriate safety cable. When installing the
fixture in a suspended environment, always use mounting hardware that is no less
than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw
holes in the bracket of the fixture.
•
Use the original packaging and materials to transport the fixture in for service.
•
DO NOT TOUCH
the housing bare-hand during its operation. Turn OFF the power
and allow approximately 15 minutes for the fixture to cool down before replacing
or serving.
