w w w . e l a t i o n l i g h t i n g . c o m
23
ELAR QUAD STRIP™ User Manual ver 1
EDIT PROGRAM – Record Controller
The fixture features an integrated DMX-recorder by which you can transmit the
programmed scenes from your DMX-controller to the moving head. Adjust the
desired scene numbers via the encoder (from – to). When you call up the scenes at
your controller, they will automatically be transmitted to the moving head.
EDIT PROGRAM – Record Controller – Working With Built In Programs
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master
unit can start 3 different Slave units, which run 3 different programs. The Master unit
sends the 3 program parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the
Slave unit was assigned to. If e.g. a Slave unit is set to
“Slave 1”
in the menu
“Set to
Slave”
, the Master unit sends
“Auto Program Part 1”
to the Slave unit.
If set to
“Slave 2”
, the Slave unit receives
“Auto Program Part 2”
.
To start an Auto Program proceed as follows:
1. Slave Setting
• Select
“Function Mode”
.
• Press
ENTER
to confirm.
• Select
“Set to Slave”
.
• Press
ENTER
to confirm.
• Select
“Slave 1”
,
“Slave 2”
or
“Slave 3”
.
• Press
ENTER
to confirm.
• Press
MODE/ESC
in order to return to the main menu.
