w w w . e l a t i o n l i g h t i n g . c o m
7
CUEPIX BLINDER WW2
™
User Manual 1.0
S A F E T Y I N S T R U C T I O N S -
C O N T I N U E D
•
Always disconnect from main power source before performing any type of service and/or cleaning
procedure. Only handle the power cord by the plug end, never pull out the plug by tugging the wire
portion of the cord.
•
Do not operate this fixture if the power cord has become frayed, crimped and/or damaged. If the power
cord is damaged, replace it immediately with a new one of similar power rating.
G E N E R A L G U I D E L I N E S
•
NEVER OPEN THIS FIXTURE WHILE IN USE!
•
During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture. This
is a normal process and is caused by excess paint in the interior of the casing burning off from the heat
associated with the lamp and will decrease gradually over time.
•
This fixture is a professional lighting effect designed for use on stage, in nightclubs, theatres, etc. Do not
attempt installation and/or operation without proper knowledge of how to do so.
•
Do not permit operation by persons who are not qualified for operating this type of theatrical fixture. Most
damages are the result of operations by nonprofessionals.
•
If this fixture is exposed to extreme temperatures due to environmental changes, do not power the fixture
on until it has reached room temperature. Condensation could damage the fixture.
•
Consistent operational breaks may ensure the fixture will function properly for many years to come.
•
Do not shake fixture, avoid brute force when installing and/or operating the device.
•
Always install the fixture with an appropriate safety cable. When installing the fixture in a suspended
environment, always use mounting hardware that is no less than M10 x 25 mm, also be sure the hardware
is insert in the pre-arranged screw holes in the base of the fixture.
•
Please use the original packaging and materials to transport the fixture in for service.
