w w w . e l a t i o n l i g h t i n g . c o m
11
CUEPIX BLINDER WW2
™
User Manual 1.0
PIXEL FLIP SETTING:
Select the desired starting COB module and chase direction from one of the following modes below via
UP/DOWN
buttons and then press
ENTER
to confirm.
OFF
1
2
ON
2
1
DIMMING CURVE SETTING:
Select the Dimming Curve Setting by pressing
MODE
button until
DIMMING CURVE
is displayed and then
press
UP/DOWN
buttons to select desired Dim Curve
Standard (default), Stage, TV, Architectural, or
Theatre.
SLAVE MODE:
Link the units via DMX cable and then set each of the Salve units to
SLAVE
mode by pressing
MODE
button and selecting
SLAVE MODE
and the slave units will operate in accordance with the Master unit.
DMX MODES
Channel Modes: (1CH, 2CH, 3CH, 4CH)
1 Channel Mode: (Both COB Module Sections)
Channel:
Value:
Function:
1
000-255
Master Dimmer (0-100%)
2 Channel Mode: (Both COB Module Sections)
Channel:
Value:
Function:
1
000-255
Master Dimmer (0-100%)
2
0-41
42-84
85-127
128-170
171-213
214-255
Dim Curves:
Standard
Stage
TV
Architectural
Theatre
Default To Unit Curve setting
