1-20 Installing the StormPort 401 eSled Modem
Revision 1.0
Storm Port 401 eSled Modem Installation Guide
08-00025-01
Task:
Installing the Ethernet Port
The Ethernet Port is an Ethernet cable with an RJ-45 plug on one end and an
RJ-45 receptacle in a molded plastic housing on the other, as shown below:
The Ethernet Port is ideally suited for installations where the reach of the eSled
Modem needs to be extended. The user simply connects to the RJ-45 connector
on the Ethernet port rather than the ethernet port on the eSled Modem.
Step Action
1
Insert the RJ-45 connector of the Ethernet Port into the ethernet port on
the eSled Modem.
2
To connect the computer to the Ethernet Port, insert one end of the
RJ-45 network cable into the Ethernet Port plastic housing, and the
other end to the 10Base-T Ethernet card connector on the computer,
STOP
You have completed this task.
