1-12 Installing the StormPort 401 eSled Modem
Revision 1.0
Storm Port 401 eSled Modem Installation Guide
08-00025-01
The StormPort 401 eSled Modem
The modem is used with an Ethernet-configured PC and an ordinary phone
line to access the Internet or corporate intranet at multi-megabit speeds. The
Modem permits simultaneous voice (or analog data) transmission on the same
telephone line. The standard telephone cable provided in the installation kit
can be used to connect a telephone, fax, or answering machine directly to your
Modem.
The StormPort 401 eSled is specifically designed to work with the Teledex
Diamond series phone set. Other phone sets are not configured to work with
the StormPort 401 eSled Modem.
This document contains the necessary procedures for installing and using the
StormPort 401 eSled Modem.
The StormPort 401 eSled Modem and the EtherLoop System
The Modem is a component of an EtherLoop system. EtherLoop is an Elastic
Networks technology that supports high-speed data simulaneously with voice
using existing phone lines. If the other network components of the EtherLoop
system have not been correctly installed, the StormPort 401 eSled Modem
will not work.
Contact your service provider or distributor technical support if you have
problems completing the installation.
Always-on Internet Connection
The Modem is a state-of-the-art, high-speed data modem that delivers an
“always-on” connection to a service provider or corporate Information Service
(IS) network. This direct access eliminates the time-consuming dial-up
sequence that is required by other modems and grants immediate access to the
Internet in addition to much faster upload/download speeds.
Factory-tested components
The Modem has been factory-tested. If you have a problem using the modem,
review the procedures in this guide. Contact your service provider or
distributor technical support if you have questions.
