VHTO100
INSTALLATION MANUAL E L A N H O M E S Y S T E M S
Page 8
© ELAN Home Systems 2005 • All rights reserved.
Override Jumper Settings
The following adjustments are made by removing the four screws on the top of the
VHTO100 and pulling up the PC board/transformer assembly. There are no wires that
need to be disconnected. The volume of ELAN Page and Door Chime audio can be
adjusted by repositioning the Override Volume Jumpers (2). There are ten settings to
choose from: 1 is the lowest, 10 is the highest (Factory Default: 5).
Impedance Match Settings
The VHTO has an impedance rating of 8 Ohms. The Impedance Match jumpers on the
VHTO allow you to connect it in parallel with other loads on the same amp channelsof
the ELAN System amplifier. It also allows you to connect multiple VHTOs to the same
amp channels. Impedance Match Jumper Settings: 1X, 2X, 4X (Factory Default: 4X).
MAX
MIN
OVERRIDE VOLUME
1
2
3
4
5
6
7
8
9
10
1X
2X
4X
IMP MA
TCH
MAX
MIN
OVERRIDE VOLUME
1
2
3
4
5
6
7
8
9
10
1X
2X
4X
IMP MA
TCH
Override
Volume
Jumper
Impedance
Match
Jumper
Override
Volume
Jumper
Impedance
Match
Jumper
System
Amplifier
VHTO100
2X Imp.
Match
8 Ohm
Speakers
System
Amplifier
VHTO100
4X Imp.
Match
4X Imp.
Match
VHTO100
8 Ohm
Speakers
8 Ohm
Speakers
4X Imp.
Match
4X Imp.
Match
Summary of Contents for VHTO100
Page 2: ......
