VHTO100
INSTALLATION MANUAL E L A N H O M E S Y S T E M S
Page 2
© ELAN Home Systems 2004 • All rights reserved.
Introduction
The VHTO100 is a high power speaker
switching module that allows ELAN Page
and Door Chime audio to be heard through
speakers in non-ELAN system areas such
as the Home Theater. A 12VDC signal-
transmitted by an ELAN Z•600
Communications Controller, ELAN HD
Series MCU or a MAC24/AV-L2 whenever
a Page or Door Chime is initiated-triggers
a pair of relays on the VHTO100, switching
the audio path from the local system
amplifier to the ELAN system amplifer.
In a Home Theater, ELAN Page and Door
Chime audio can be routed to the rear
channel speakers. This does not interupt
the entire movie presentation, (as the front
and center channel speakers will continue
to broadcast the movie audio) yet allows
the Page and Door Chime audio to be
easily heard. Another application might be
in a child's room with a stand-alone local
system and the parents wish to have
ELAN Page and Door Chime audio heard.
VHTO100
Front
SURROUND SOUND
PROCESSOR
(SSP) Rear Channel
Speaker Inputs
Rear Channel
Speaker Outputs
VC+/VC
Override
Connections
System Amplifier
Speaker Inputs
AMP OR SPEAKERS
SSP
VHTO100
System Amplifier
Local Amplifier (SSP)
Rear Surround Speakers
Default Signal Path
Override Signal Path/
ELAN PG/DB
Rear Channel
Speaker Outputs
Specifications
Power Rating/System Amplifier Input ...............100Watts RMS
Power Rating/SSP Amplifier Input .....200W RMS into 8 Ohms
Power Rating/Rlay Switching ...........................................200W
Frequency Response .........................20 Hz to 20KHz, +/- 1dB
Total Harmonic Distortion ...................................................<1%
Override Volume Settings ..............................................10 Step
Override Control ............................................+12 VDC @ 90mA
Dynamic Range ......................................... 43dB over 10 steps
Impedance Settings ..................................................1X, 2X, 4X
Speaker Output, Minimum Load .................................. 4 Ohms
Maximum Attenuation ............................................ -56dB @ 8X
DC Resistance .............................................. Minimum 5 Ohms
Relay Contacts .................................. 5A RMS Max @ 250 VAC
Wiring Requirements:
SSP Input/Amp Input/Speaker Output:
Twisted pair audio cable, min. 18 AWG
Override Input (OR): Cat-5
Summary of Contents for VHTO100
Page 2: ......
