background image

Note: 

5. Safety Standard   

Users should ensure that light and installation materials are checked for regular safety checks. 

Unprofessional incorrect installation can lead to  dangerous, if  the lack of working conditions and 
professional standards, please operate the light by professionals.   

Do  not  use  the  light  if  the  working  temperature  isn’t  0-40  degrees  Celsius.  Don’t  stand  directly 

under the light when the light is installed, dismantled, moved or serviced. The operator must ensure that 
the  fixtures are securely connected. Installing the  light after professionals approving electrical 
parameters make sure that these installation must be checked at least once per year by experts. 

5.

 

Safety Standard

5.1 Hook Clamp Installation 

PG-300W-IP

 light  could  be placed on the stage or on a stand in any direction

quick lock system 

can quickly and easily remove or install a light hook. 

Note: 

5.2 Fixing Equipment 

1.Before installing fixtures must verified rigging equipment is not damaged, and can bear at least 10

times of light’s weight. Check the building can be bore at least 10 times of total weights of light, fixture, 
and cable accessories. 

2. Insert the locked hook fastener into base mounting holes horizontally, grab the handle clockwise 90

degrees fasteners, in the same way to install a second fastener, make sure the fastener is fastened under 
the light base. 

3. If truss can be lifted the equipment can be directly clamped from flight case and locked fixture base.

Then hung on the light and fixed it. Before rising the light to right height, connect the power line and 
signal line. 

Note: add a safety rope attached the light's base insurance shelf, do not connect the device handle. 

Upon  receipt  of  lamps,  please  check  if  there  is  damage  to  the  fold 

closure caused by transport, where there is transportation damage, 

please do not use this fixture, and contact us as soon as possible.

Two fixtures must be used to secure the device and tighten the clamp with 

a 1/4 button. Only the 90° clockwise rotation can lock the fastener. 

Summary of Contents for PG-300W-IP



















Reviews: