©2004 ELAN Home Systems. All Rights Reserved. 04/04.
Page 11
ELAN HOME SYSTEMS
MUSIC AND COMMUNICATIONS
DISTRIBUTION CENTER
MAC24
INSTALLATION MANUAL
Determining the Maximum Amount of Speakers and Volume Controls
w/ Override That Can Be Connected to the MAC24.
The following tables assume:
1. One ELAN MACVSO Stereo Volume Control w/ Override at an impedance match setting of 8X
per 8 ohm stereo pair.
2. One ELAN MACVMO Mono Volume Control w/ Override at an impedance match setting of 16X
per 8 ohm per mono speaker.
3. All mono speakers are distributed evenly between the MAC24’s mono speaker connections.
Number of 8 Ohm Stereo Speaker
Maximum Number of 8 Ohm
Pairs Connected to the MAC24
MONO Speakers Allowed
0
24
1
20
2
16
3
12
4
8
5
4
6
0
Number 4 or 6 Ohm Stereo Speaker
Maximum Number of 8 Ohm
Pairs Connected to the MAC24
MONO Speakers Allowed
0
12
1
9
2
6
3
3
4
0
Failure to comply with the
Maximum Speaker and
Override Volume Control
Specifications may cause
damage to the amplifier
and will VOID the manu-
facturer’s warranty.
Based on the same assumptions, the table below indicates the combinations of Stereo and
Mono speakers that can be connected to the MAC24 when using
4 or 6 Ohm speakers.
A maximum of 12 MACVSO and/or MACVMO Volume Controls with override can
be connected to the MAC24 without the use of an ex12VDC power supply.
See
Adding Additional Volume Controls
p. 22.
The MAC24 is designed specifically for use with ELAN MACVSO
and MACVMO Volume Controls ONLY! Failure to comply with
this specification may cause damage to the amplifier and will
VOID the manufacturer’s warranty.
All Stereo Volume Controls
(MACVSO) must be set to
8X Impedance Match.
All Mono Volume Controls
(MACVMO) must be set to
16X Impedance Match.
Summary of Contents for MAC24
Page 1: ......
Page 40: ...P N 9900495 REV C 04 04 Telephone Quick Reference...