Owner's Manual
4.2.1
Voltage
12
12
12
12 V DC System
1
2
3
DC fuses are provided in the various circuits as shown in the following table:
Circuit
Rating (A)
Protection
Removal of Batteries
Ensure that the battery space is well ventilated at all times.
Turn the battery switch to the OFF position
Remove the negative cable first, then the positive cable. To replace the cables,
first replace the positive cable, then the negative.
Caution
Main supply to consumers
Fuse
Optional consumers
Bilge pump
The direct current (DC) electrical system derives its power from the series of batteries listed below.
The batteries supply the components listed in tables below which show the settings of the overload
protection breakers/fuses.
Aft of battery
Below aft berths
Rating
Below aft berths
Disconnect Switch
Engine & generator start
2 x 95Ah
DC System
The battery selector switch is located at:
Main DC Panel Board Location:
N/A: disconnect relay switch only
Above navigation station in port aft corner of saloon
Outboard of
batteries
Below aft berths
Bove batteries
Battery Location
Battery Bank
1 x 70Ah
2 x 95Ah
Bow thruster
Consumer
50
Fuse
80
80
Fuse
Anchor winch
The DC system consists of the following circuits:
Fuse
Description
30
When charging and (dis)connecting a battery ensure that no water or
metal objects can contact the terminals.
Turn off all items drawing power from the battery.
Caution
To remove the battery cables:
Technical Software
© Licensed User: Elan d.o.o., 2019
12/44
